Hebei JSTAR Carton Equipment Co.,ltd.
搜索
Product Center
Your current location:
Homepage
-
-
-
ZYK-1600 SERIES PRINTER SLOTTER DIE CUTTER
Number of views:
1000

ZYK-1600 SERIES PRINTER SLOTTER DIE CUTTER

Retail price
0.0
Market price
0.0
Number of views:
1000
Product serial number
Quantity
-
+
Stock:
Category
Returns
1
Product description
Parameters

ZYK-1600 SERIES AUTOMATIC PRINTER SLOTTER DIE CUTTER

 

 

Specifications:

Printing units

can be chosen according to users' needs

Printing Paperboard

A.B.C.E   3/5/7 layer corrugated board

Machine Speed

150 sheets/min

Max. Paper Size

1600×2800 mm

Max. Printing Size

1600×2600mm

Max. die cutting size

1600×2750mm

Min. Paper Sizes

Positive knife420×700mm; inverse knife 420×800mm

 Printing registration precision

±1mm

Printing-plate adjustment
left and right position

10mm

Standard Printing Plate Thickness

4-9mm

Cardboard thickness

2-12mm

Max. slit corner Width

50mm

Max. stack height

1600mm

Printing Roller
(Plus Printing Plate Thickness)

535mm

 

Characteristics:

1、Control system: Delta PLC, production order can be saved and recalled to save changing time. Memorize system for easy operation and maintenance.

2、Double servo feeding system,each row of feeding wheels is driven by indepandent servo motor,high precision and low noise,non-feeding rollers in feeder to prevent the corrugated wave from damaging.

3、Printing: Adopt famous brand anilox roll and rubber roll to ensure high-quality printing.

4、Slotter: Computerized set the box length, width and box height, fast and convenient.

5、Die cutter: independent engine drive controlled by KEB servo system from Germany to ensure the die cutting accuracy. Surface speed compensation system. Die cylinder shifts when running to prolong the life of rubber anvil.

6、Gears are made of Material 20CrMoTi alloy steel, heat treated and grinded to ensure the high stability and precision.

7、Bearings and electrical components are all famous brand in Taiwan and in China.

 

Introduction to the lead feeder:

1、Double servo feeding system,each row of feeding wheels is driven by independent servo motor,high precision and low noise,non-feeding rollers in feeder to prevent the corrugated wave from damaging.

2、Dust removal device: the cleaning brush and the suction fan can clean the dust on surface of corrugated board to improve the printing quality.

3、Side stop is motorized control. Flapping device to make the sheet pile in good shape.

4、Control system

A.All the information can be showed and adjusted in the main touchscreen. The phase of each unit, box height can be setted in the main touchscreen,

B.Memory system: Production orders can be saved and recalled to save changing time.

C.Ink alarm system, the buzzer sounds when the printing unit be lack of ink.

 

 

Introduction to printing unit:

1、Memory system for easy operation and maintenance.(This system can help to remember position of printing cylinder when operator stop the machine and open it to adjustment on printing plate. After finishing adjustment and close the machine sections, people can use this system to make printing cylinder return to the former position (before stop and open sections).

2、7.0 inch touchscreen on the printing unit,The printing register is computerized control. The printing cylinder is motorized and computerized moved axially(±5mm).

3、Mounting plate system to save the changing plate time. foot switch is used to turn the printing cylinder when mounting the printing plate.

4、The anilox roll lift up and separate from the printing plate automatically when sheets are not feeded. And the anilox roll keep running when lifted up to prevent the ink from drying.

5、Self-locking and fast move of the feeding wheels on printing unit.no need to fix the feeding wheels by screws.

 

 

Introduction to the slotting unit:

1、Single shaft double knives slotter,7.0 inch touchscreen on the slotter, box height, box length and width are all sett by PLC and can be stored in the computer, saving the changing time. 

2、The up knife,lower knife, pre-creaser and creaser are synchronously moved. The precision liner slideway can ensure the flexible and stable of moving.

3、The up creaser wheel is covered by rubber anvil to protect the corrugated board from damage.

4、Flexible corner cutting knife can cut 3,5 and 7 layer corrugated board without adjustment.Easy to operate.

5、The cutting knife is made of high quality alloy steel, knife thickness 7mm.

6、Hand hole punching device is optional.

 

 

Introduction to the die cutting unit:

1、Independent engine drive controlled by KEB servo system from Germany to ensure the die cutting precision. 

2、Surface speed compensation system, this system can ensure rubber anvil cylinder running at the exact same speed with the die cylinder when the rubber anvil cylinder's diameter becomes smaller after long time using.

3、Die cylinder shifts axially(±42mm)when running so that the cutting knives cuts different position every time on the rubber anvil,which can reduce the damage for the rubber anvil.

4、A turning tool on the die cutter can repair the rubber anvil which is damaged after long time using.

5、The die cutting phase is controlled by PLC (both in running and stop )and can be stored in the computer.

6、Self-locking and fast move of feeding wheels, no need to fix it with screws.

 

 

We could not find any corresponding parameters, please add them to the properties table
Previous
Next

Related Products

There is currently no content to display
Please add data record on website background.

Product Message

Username used for comment:
客户留言
Description:
code

Hebei JSTAR Carton Equipment Co.,ltd.

Address: No.345 Guanzhou Road, Dongguang County, Cangzhou City, Hebei Province

Telephone: 86-317-7722358

Fax (FEX) : 86-317-7896188

WEB site: www.hb-jx.com

E-mail: pack@jstarchina.com

 

Copyright hebei Jixing Carton Equipment Co., LTD. All Rights Reserved    冀ICP备********号   Powered by www.300.cn

Hebei JSTAR Carton Equipment Co.,ltd.